SM320F28335PTPMEP Datasheet, PDF (123/167 Pages) Texas Instruments – Digital Signal Controller (DSC)

SM320F28335-EP
www.ti.com
SPRS581D – JUNE 2009 – REVISED MAY 2012
6.12 I2C Electrical Specification and Timing
Table 6-30. I2C Timing
f_SCL
v_il
V_ih
V_hys
V_ol
t_LOW
t_HIGH
l_I
TEST CONDITIONS
SCL clock frequency
I2C clock module frequency is between
7 MHz and 12 MHz and I2C prescaler and
clock divider registers are configured
appropriately
Low level input voltage
High level input voltage
Input hysteresis
Low level output voltage
3-mA sink current
Low period of SCL clock
I2C clock module frequency is between
7 MHz and 12 MHz and I2C prescaler and
clock divider registers are configured
appropriately
High period of SCL clock
I2C clock module frequency is between
7 MHz and 12 MHz and I2C prescaler and
clock divider registers are configured
appropriately
Input current with an input voltage
between 0.1 V_DDIO and 0.9 V_DDIO MAX
MIN
0.7 V_DDIO
0.05 V_DDIO
0
1.3
0.6
-10
MAX
400
UNIT
kHz
0.3 V_DDIO
V
V
V
0.4
V
μs
μs
10
μA
6.13 Serial Peripheral Interface (SPI) Timing
This section contains both Master Mode and Slave Mode timing data.
6.13.1 Master Mode Timing
Table 6-31 lists the master mode timing (clock phase = 0) and Table 6-32 lists the timing (clock
phase = 1). Figure 6-19 and Figure 6-20 show the timing waveforms.
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): SM320F28335-EP
Electrical Specifications 123