SM320F28335PTPMEP Datasheet, PDF (124/167 Pages) Texas Instruments – Digital Signal Controller (DSC)

SM320F28335-EP
SPRS581D – JUNE 2009 – REVISED MAY 2012
www.ti.com
Table 6-31. SPI Master Mode External Timing (Clock Phase = 0)^{(1) (2) (3) (4) (5)}
NO.
SPI WHEN (SPIBRR + 1) IS EVEN OR
SPIBRR = 0 OR 2
MIN
MAX
1 t_c(SPC)M
2 t_w(SPCH)M
Cycle time, SPICLK
Pulse duration, SPICLK high
(clock polarity = 0)
4t_c(LCO)
0.5t_c(SPC)M -10
128t_c(LCO)
0.5t_c(SPC)M
t_w(SPCL)M
Pulse duration, SPICLK low
(clock polarity = 1)
0.5t_c(SPC)M - 10
0.5t_c(SPC)M
3 t_w(SPCL)M
Pulse duration, SPICLK low
(clock polarity = 0)
0.5t_c(SPC)M - 10
0.5_tc(SPC)M
t_w(SPCH)M
Pulse duration, SPICLK high
(clock polarity = 1)
0.5_tc(SPC)M - 10
0.5t_c(SPC)M
4 t_{d(SPCH-SIMO)M}
Delay time, SPICLK high to SPISIMO
10
valid (clock polarity = 0)
t_{d(SPCL-SIMO)M}
Delay time, SPICLK low to SPISIMO
10
valid (clock polarity = 1)
5 t_{v(SPCL-SIMO)M}
Valid time, SPISIMO data valid after
SPICLK low (clock polarity = 0)
0.5t_c(SPC)M -10
t_{v(SPCH-SIMO)M}
Valid time, SPISIMO data valid after
SPICLK high (clock polarity = 1)
0.5t_c(SPC)M -10
8 t_{su(SOMI-SPCL)M}
Setup time, SPISOMI before SPICLK
35
low (clock polarity = 0)
t_{su(SOMI-SPCH)M}
Setup time, SPISOMI before SPICLK
35
high (clock polarity = 1)
9 t_{v(SPCL-SOMI)M}
Valid time, SPISOMI data valid after
SPICLK low (clock polarity = 0)
0.25t_c(SPC)M -10
t_{v(SPCH-SOMI)M}
Valid time, SPISOMI data valid after
SPICLK high (clock polarity = 1)
0.25t_c(SPC)M - 10
(1) The MASTER / SLAVE bit (SPICTL.2) is set and the CLOCK PHASE bit (SPICTL.3) is cleared.
(2) t_c(SPC) = SPI clock cycle time = LSPCLK/4 or LSPCLK/(SPIBRR +1)
(3) t_c(LCO) = LSPCLK cycle time
(4) Internal clock prescalers must be adjusted such that the SPI clock speed is limited to the following SPI clock rate:
Master mode transmit 25-MHz MAX, master mode receive 12.5-MHz MAX
Slave mode transmit 12.5-MHz MAX, slave mode receive 12.5-MHz MAX.
(5) The active edge of the SPICLK signal referenced is controlled by the clock polarity bit (SPICCR.6).
SPI WHEN (SPIBRR + 1) IS ODD
AND SPIBRR > 3
MIN
MAX
5t_c(LCO)
0.5t_c(SPC)M - 0.5t_c(LCO) - 10
127t_c(LCO)
0.5t_c(SPC)M - 0.5t_c(LCO)
0.5t_c(SPC)M - 0.5t_c(LCO) - 10
0.5t_c(SPC)M - 0.5t_c(LCO)
0.5t_c(SPC)M + 0.5t_c(LCO)-10 0.5t_c(SPC)M + 0.5t_c(LCO)
0.5t_c(SPC)M + 0.5t_c(LCO)- 10 0.5t_c(SPC)M + 0.5t_c(LCO)
10
10
0.5t_c(SPC)M + 0.5t_c(LCO) -10
0.5t_c(SPC)M + 0.5t_c(LCO) -10
35
35
0.5t_c(SPC)M- 0.5t_c(LCO)- 10
0.5t_c(SPC)M- 0.5t_c(LCO)- 10
UNIT
ns
ns
ns
ns
ns
ns
ns
124 Electrical Specifications
Submit Documentation Feedback
Product Folder Link(s): SM320F28335-EP
Copyright © 2009–2012, Texas Instruments Incorporated