C8051F388-B Datasheet, PDF (54/285 Pages) Silicon Laboratories – Flash MCU Family

C8051F388/9/A/B
6.4.1. Window Detector Example
Figure 6.6 shows two example window comparisons for right-justified, single-ended data, with
ADC0LTH:ADC0LTL = 0x0080 (128d) and ADC0GTH:ADC0GTL = 0x0040 (64d). The input voltage can
range from 0 to VREF x (1023/1024) with respect to GND, and is represented by a 10-bit unsigned integer
value. In the left example, an AD0WINT interrupt will be generated if the ADC0 conversion word
(ADC0H:ADC0L) is within the range defined by ADC0GTH:ADC0GTL and ADC0LTH:ADC0LTL
(if 0x0040 < ADC0H:ADC0L < 0x0080). In the right example, and AD0WINT interrupt will be generated if
the ADC0 conversion word is outside of the range defined by the ADC0GT and ADC0LT registers
(if ADC0H:ADC0L < 0x0040 or ADC0H:ADC0L > 0x0080). Figure 6.7 shows an example using left-justi-
fied data with the same comparison values.
Figure 6.6. ADC Window Compare Example: Right-Justified Data
Figure 6.7. ADC Window Compare Example: Left-Justified Data
54
Rev. 1.1