C8051F388-B Datasheet, PDF (1/285 Pages) Silicon Laboratories – Flash MCU Family

Analog Peripherals
- 10-Bit ADC
• Up to 500 ksps
• Built-in analog multiplexer with single-ended and
differential mode
• VREF from external pin, internal reference, or V_DD
• Built-in temperature sensor
• External conversion start input option
- Two comparators
- Internal voltage reference
- Brown-out detector and POR Circuitry
On-Chip Debug
- On-chip debug circuitry facilitates full speed, non-intru-
sive in-system debug (No emulator required)
- Provides breakpoints, single stepping,
inspect/modify memory and registers
- Superior performance to emulation systems using
ICE-chips, target pods, and sockets
Voltage Supply Input: 2.7 to 5.25 V
- Voltages from 2.7 to 5.25 V supported using On-Chip
Voltage Regulators
High Speed 8051 μC Core
- Pipelined instruction architecture; executes 70% of
instructions in 1 or 2 system clocks
- Up to 48 MIPS operation
- Expanded interrupt handler
C8051F388/9/A/B
Flash MCU Family
Memory
- 4352 or 2304 Bytes RAM
- 64 or 32 kB Flash; In-system programmable in 512-byte
sectors
Digital Peripherals
- 40/25 Port I/O; All 5 V tolerant with high sink current
- Hardware enhanced SPI™, two I²C/SMBus™, and two
enhanced UART serial ports
- Six general purpose 16-bit counter/timers
- 16-bit programmable counter array (PCA) with five cap-
ture/compare modules
- External Memory Interface (EMIF)
Clock Sources
- Internal Oscillator: ±1.5% accuracy. Supports all UART
modes
- External Oscillator: Crystal, RC, C, or clock (1 or 2 Pin
modes)
- Low Frequency (80 kHz) Internal Oscillator
- Can switch between clock sources on-the-fly
Packages
- 48-pin TQFP (C8051F388/A)
- 32-pin LQFP (C8051F389/B)
- 5x5 mm 32-pin QFN (C8051F389/B)
Temperature Range: –40 to +85 °C
Rev. 1.1 5/15
Copyright © 2015 by Silicon Laboratories
C8051F388/9/A/B