C8051F388-B Datasheet, PDF (211/285 Pages) Silicon Laboratories – Flash MCU Family

C8051F388/9/A/B
24. Enhanced Serial Peripheral Interface (SPI0)
The Enhanced Serial Peripheral Interface (SPI0) provides access to a flexible, full-duplex synchronous
serial bus. SPI0 can operate as a master or slave device in both 3-wire or 4-wire modes, and supports mul-
tiple masters and slaves on a single SPI bus. The slave-select (NSS) signal can be configured as an input
to select SPI0 in slave mode, or to disable Master Mode operation in a multi-master environment, avoiding
contention on the SPI bus when more than one master attempts simultaneous data transfers. NSS can
also be configured as a chip-select output in master mode, or disabled for 3-wire operation. Additional gen-
eral purpose port I/O pins can be used to select multiple slave devices in master mode.
Figure 24.1. SPI Block Diagram
Rev. 1.1
211