7220 Datasheet, PDF (260/303 Pages) Renesas Technology Corp – 8-BIT SINGLE-CHIP MICROCOMPUTER

APPENDIX
6.7 Control registers
Color Register n
b7 b6 b5 b4 b3 b2 b1 b0
Color register n (CO0 to CO3) (n = 0 to 3) [Addresses 00E616 to 00E916]
B
Name
Functions
After reset R W
0 Nothing is assigned. This bit is a write disable bit.
When this bit is read out, the value is “0.”
0 R—
1 B signal output
selection bit (COn1)
2 G signal output
selection bit (COn2)
0 : No character is output
1 : Character is output
0 : No character is output
1 : Character is output
0 RW
0 RW
3 R signal output
selection bit (COn3)
0 : No character is output
1 : Character is output
0 RW
4 B signal output (background) 0 : No background color is output
0
selection bit (COn4)
1 : Background color is output _{(See note 1)}
RW
5 OUT1 signal output
control bit (COn5)
0 : Character is output
1 : Blank is output
0 RW
(See notes 1, 2)
6 G signal output (background) 0 : No background color is output
selection bit (COn6)
1 : Background color is output
0 RW
7 R signal output (background) 0 : No background color is output
0
selection bit (COn7)
1 : Background color is output _{(See note 2)}
RW
Notes 1: When bit 5 = “0” and bit 4 = “1,” there is output same as a character or border output
from the OUT1 pin.
Do not set bit 5 = “0” and bit 4 = “0.”
2: When only bit 7 = “1” and bit 5 = “0,” there is output from the OUT2 pin.
3: M37220M3-XXXSP/FP
4 Nothing is assigned. This bit is a write disable bit.
When this bit is read out, the value is “0.”
5 OUT signal output
control bit (COn5)
0 : Character is output
1 : Blank is output
6, 7 Nothing is assigned. These bits are write disable bits.
When these bits are read out, the values are “0.”
0 R—
0 RW
0 R—
(See note 3)
Fig. 6.7.18 Color register n
Addresses 00E616 to 00E916
7220 Group User’s Manual
6-41