7220 Datasheet, PDF (167/303 Pages) Renesas Technology Corp – 8-BIT SINGLE-CHIP MICROCOMPUTER

M37220M3-XXXSP/FP
4.6 Electrical characteristics
Recommended operating conditions (Ta = –10 °C to 70 °C, VCC = 5 V ± 10 %, unless otherwise noted)
Symbol
Parameter
VCC
Power source voltage (Note 4), During CPU, CRT operation
VSS
Power source voltage
VIH
HIGH input voltage
P00–P07,P10–P17, P20–P27,
P30–P34, SIN, SCLK, HSYNC,
V , SYNC RESET, XIN, OSC1,
TIM2, TIM3, INT1, INT2, INT3
VIL1
LOW input voltage
P00–P07,P10–P17, P20–P27,
P30–P34
VIL2
LOW input voltage
HSYNC, VSYNC, RESET, TIM2,
TIM3, INT1, INT2, INT3, XIN,
OSC1, SIN, SCLK
IOH
HIGH average output current (Note 1) R, G, B, OUT, D-A, P10–P17,
P20–P27, P30, P31
IOL1
LOW average output current (Note 2) R, G, B, OUT, D-A, P06, P07,
P10–P17, P20–P27, P30–P32
IOL2
LOW average output current (Note 2) P00–P05
IOL3
LOW average output current (Note 3) P24–P27
f(XIN) _{Oscillation frequency (for CPU operation) (Note 5) XIN}
fCRT
Oscillation frequency (for CRT display) (Note 5) OSC1
fhs1
Input frequency
TIM2, TIM3
fhs2
Input frequency
SCLK
Min.
4.5
0
0.8VCC
0
0
7.9
5.0
Typ.
5.0
0
8.0
Max. Unit
5.5 V
0
V
VCC
V
V
0.4VCC V
0.2VCC V
1 mA
2 mA
1 mA
10 mA
8.1 MHz
8.0 MHz
100 kHz
1 MHz
Notes 1: The total current that flows out of the IC must be 20 mA (max.).
2: The total input current to IC (IOL1 + IOL2) must be 30 mA or less.
3: The total average input current for ports P24–P27 to IC must be 20 mA or less.
4: Connect 0.1 µF or more capacitor externally across the power source pins VCC–VSS so as to
reduce power source noise. Also connect 0.1 µF or more capacitor externally across the pins
VCC–CNVSS.
5: Use a quartz-crystal oscillator or a ceramic resonator for the CPU oscillation circuit.
7220 Group User’s Manual
4-29