HD6475368CP Datasheet, PDF (99/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Using the HP 64869
Reader from the PC
Interface
The H8/536 PC Interface has a file format option under the "Memory,
Load" command. After you select this option, the HP 64869 Reader
will operate on the file you specify. After this completes successfully,
the H8/536 PC Interface will accept the absolute and symbol files
produced by the Reader.
To use the Reader from the PC Interface, follow these steps:
1. Start up the H8/536 PC Interface.
2. Select "Memory, Load". The memory load menu will appear.
3. Specify the file format as "HP64869". This will appear as the
default file format.
4. Specify a file in HP 64869 format ("TESTFILE.ABS", for
example, ). The file extension can be something other than
".ABS", but cannot be ".HPA", ".HPT", or ".HPS".
Note
The "<filename>.HPT" file is a temporary file used by the HP 64869
Reader to process the symbols.
Using the HP 64869 format file that you specify (TESTFILE.ABS, for
example), the PC Interface performs the following:
Checks to see if two files with the same base name and
extensions .HPS and .HPA already exist (for example,
TESTFILE.HPS and TESTFILE.HPA).
If TESTFILE.HPS and TESTFILE.HPA don’t exist, the HP
64869 Reader produces them. The new absolute file,
TESTFILE.HPA, is then loaded into the emulator.
If TESTFILE.HPS and TESTFILE.HPA already exist but the
create dates and times are earlier than the HP 64869 format
file creation date/time, the HP 64869 Reader recreates them.
The new absolute file, TESTFILE.HPA, is then loaded into
the emulator.
File Format Readers A-9