HD6475368CP Datasheet, PDF (67/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Enable CMB
Interaction?
Note
Coordinated measurements are measurements synchronously made in
multiple emulators or analyzers. Coordinated measurements can be
made between HP 64700 Series emulators which communicate over
the Coordinated Measurement Bus (CMB).
Multiple emulator start/stop is one type of coordinated measurement.
The CMB signals READY and /EXECUTE are used to perform
multiple emulator start/stop.
This configuration item allows you to enable/disable interaction over
the READY and /EXECUTE signals. (The third CMB signal,
TRIGGER, is unaffected by this configuration item.)
No
The emulator ignores the /EXECUTE and READY
lines, and the READY line is not driven.
Yes
Multiple emulator start/stop is enabled. If the
Processor, CMB, Go, ...
command is entered, the emulator will start
executing code when a pulse on the /EXECUTE
line is received. The READY line is driven false
while the emulator is running in the monitor; it goes
true whenever execution switches to the user
program.
CMB interaction will also be enabled when the
Processor, CMB, Execute
command is entered.
Configuring the Emulator 4-7