HD6475368CP Datasheet, PDF (73/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Processor type
Note
The configuration allows you to select processor to be emulated.
536
When you are going to emulate H8/536
microprocessor, select this item.
534
When you are going to emulate H8/534
microprocessor, select this item.
Changing this configuration drives the emulator into the reset state.
Processor
Operation Mode
This configuration defines operation mode in which the emulator
works.
ext
The emulator will work using the mode setting by
the target system. The target system must supply
appropriate input to MD0, MD1 and MD2. If you
are using the emulator out of circuit when
"external" is selected, the emulator will operate in
mode 7.
<mode_num>
When <mode_num> is selected, the emulator will
operate in selected mode regardless of the mode
setting by the target system.
Valid <mode_num> are following:
<mode_num> Description
1
The emulator will operate in mode 1.
(expanded minimum mode)
Configuring the Emulator 4-13