HD6475368CP Datasheet, PDF (27/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Starting Up the PC
Interface
If you have set up the emulator device table and the HPTABLES shell
environment variable as shown in the HP 64700 Emulators PC
Interface: User’s Reference, you can start up the H8/536 PC Interface
by entering the following command from the MS-DOS prompt:
pch8536 <emulname>
In the command above, pch8536 is the command to start the PC
Interface; "<emulname>" is the logical emulator name given in the
emulator device table. (To start version of the PC Interface that
supports external timing analysys, substitute pth8536 for pch8536 in
this command.) If this command is successful, you will see the display
shown in figure 2-3. If this command is not successful, you will be
given an error message and returned to the MS-DOS prompt.
Figure 2-3. PC Interface Display
Getting Started 2-29