HD6475368CP Datasheet, PDF (18/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Clock source
Internal
External
Table 1-2. Clock Speeds
Model
Microprocessor
HP 64739A
(H8/536 emulator)
H8/536
H8/534
HP 64739B
(H8/536S emulator)
H8/536
H8/534
H8/536S
H8/534S
HP 64739A
(H8/536 emulator)
H8/536
H8/534
HP 64739B
(H8/536S emulator)
H8/536
H8/534
H8/536S
H8/534S
Clock Speed
10MHz
(System clock)
10MHz
(System clock)
From 0.5 up to 10MHz
(System clock)
From 0.5 up to 10MHz
(System clock)
From 0.5 up to 16MHz
(System clock)
Emulation memory
The H8/536 emulator is used with one of the following Emulation
Memory Cards.
HP 64726A 128K byte Emulation Memory Card
HP 64727A 512K byte Emulation Memory Card
HP 64728A 1M byte Emulation Memory Card
You can define up to 16 memory ranges (at 256 byte boundaries and
least 256 byte in length.) The emulator occupies 2K byte, which is
used for monitor program, leaving 126K, 510K, 1022K byte of
emulation memory which you may use. You can characterize memory
range as emulation RAM (eram), emulation ROM (erom), target
system RAM (tram), target system ROM (trom), or guarded memory
(grd). The emulator generates an error message when accesses are
made to guarded memory locations. You can also configure the
emulator so that writes to memory defined as ROM cause emulator
execution to break out of target program execution.
1-20 Introduction