HD6475368CP Datasheet, PDF (38/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Displaying
Memory in
Mnemonic Format
Once you have loaded a program into the emulator, you can verify that
the program has indeed been loaded by displaying memory in
mnemonic format. To do this, select:
Memory, Display, Mnemonic
Enter the address range "1000..1029". (You could also specify this
address range using symbols, for example, "Init..Cmd_I" or
"Init..Init+29".) The emulation window automatically becomes the
active window as a result of this command. You can press <CTRL>z
to zoom the emulation window. The resulting display follows.
If you wish to view the rest of the sample program memory
locations,you can select "Memory Display Mnemonic" command
again and enter the range from "102a..1042".
2-40 Getting Started