HD6475368CP Datasheet, PDF (71/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Enable /RES Input
from Target?
This configuration allows you to specify whether or not the emulator
responds to /RES and /STBY signals by the target system during
foreground operation.
While running the background monitor, the emulator ignores /RES and
/STBY signals except that the emulator’s status is "Awaiting target
reset".
yes
The emulator will respond to /RES and /STBY
input during foreground operation.
no
The emulator will not respond to /RES and /STBY
input from the target system.
Note
Changing this configuration drives the emulator into the reset state.
Note
If you specify that the emulator will drive the /RES signal to the target
system during emulation reset or by the overflow of Watch Dog Timer,
the emulator should be configured to respond to the /RES input to the
target system.
Configuring the Emulator 4-11