HD6475368CP Datasheet, PDF (34/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Using Symbols
The following pages show you how to display global and local symbols
for the sample program. For more information on symbol display,
refer to the PC Interface Refernce.
Displaying Global When you load HP 64869 or HP64000 format absolute files into the
Symbols ^{emulator, the corresponding symbol database is also loaded.}
The symbols database can also be loaded with the "System Symbols
Global Load" command. This command is provided for situations
where multiple absolute files are loaded into the emulator; it allows
you to load the various sets of global symbols corresponding to the
various absolute files. When global symbols are loaded into the
emulator, information about previous global symbols is lost (that is,
only one set of global symbols can be loaded at a time).
After global symbols are loaded, both global and local symbols can be
used when entering expressions. Global symbols are entered as they
appear in the source file or in the global symbols display.
To display global symbols, select:
System, Symbols, Global, Display
The symbols window automatically becomes the active window as a
result of this command. You can press <CTRL>z to zoom the
window. The resulting display follows.
2-36 Getting Started