HD6475368CP Datasheet, PDF (55/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Exiting the PC
Interface
There are two different ways to exit the PC Interface. You can exit the
PC Interface using the "locked" option which specifies that the current
configuration will be present next time you start up the PC Interface.
You can select this option as follows.
System, Exit, Locked
Symbols are lost when you use the "System Exit Locked" command;
however, you can reload them (after you reenter the PC Interface) with
the "System Symbols Global Load" command.
The other way to execute the PC Interface is with the "unlocked"
option which specifies that the default configuration will be present the
next time you start up the PC Interface. You can select this option with
the following command.
System, Exit, Unlocked
Getting Started 2-57