HD6475368CP Datasheet, PDF (69/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Drive Background
Cycles to Target?
This question allows you specify whether or not the emulator will drive
the target system bus on background cycles.
If you have selected to use a foreground monitor, emulator foreground
monitor cycles will appear at the target interface exactly as if they were
bus cycles caused by any target system program.
yes
Specifies that background cycles are driven to the
target system. Emulation processor’s address and
control strobes (except /WR) are driven during
background cycles. Background write cycles won’t
appear to the target system.
no
Background monitor cycles are not driven to the
target system. When you select this option, the
emulator will appear to the target system as if it is
between bus cycles while it is operating in the
background monitor.
Note
Changing this configuration drives the emulator into the reset state.
Configuring the Emulator 4-9