HD6475368CP Datasheet, PDF (22/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Before You Begin
Prerequisites
Before beginning the tutorial presented in this chapter, you must have
completed the following tasks:
1. Connected the emulator to your computer. The HP 64700
Emulators: Hardware Installation and Configuration manual
shows you how to do this.
2. Installed the PC Interface software on your computer.
Software installation instructions are shipped with the media
containing the PC Interface software. The HP 64700
Emulators PC Interface: User’s Reference manual contains
additional information on the installation and setup of the PC
Interface.
3. In addition, it is recommended, although not required, that you
read and understand the concepts of emulation presented in
the HP 64700 Emulators: System Overview manual. The
System Overview also covers HP 64700 Series system
architecture. A brief understanding of these concepts may
help avoid questions later.
You should read the HP 64700 Emulators PC Interface:
User’s Reference manual to learn how to use the PC Interface
in general. For the most part, this manual contains
information specific to the H8/536 emulator.
A Look at the Sample The sample program used in this chapter is listed in Figure 2-1. The
Program ^{program is a primitive command interpreter.}
Using the various features of the emulator, we will show you how to
load this program into emulation memory, execute it, monitor the
program’s operation with the analyzer, and simulate entry of different
commands by using the "Memory Modify" emulation command.
2-24 Getting Started