HD6475368CP Datasheet, PDF (59/108 Pages) Agilent(Hewlett-Packard) – H8/536 Emulator PC Interface

Installing into a
PLCC Type Socket
To connect the microprocessor connector to the target system,
proceeded with the following instructions.
1. Remove the H8/536 microprocessor from the target system
socket (PLCC socket). Note the location of pin 1 on the
processor and on the target system socket.
2. Store the microprocessor in a protected environment (such as
antistatic foam).
3. Install the target system probe into the target system
microprocessor socket.
Figure 3-8. Installing into a PLCC type socket
In-Circuit Emulation 3-61