English
Language : 

MC9S12C Datasheet, PDF (644/680 Pages) Motorola, Inc – 16-Bit Microcontroller
Appendix A Electrical Characteristics
A.1.9 I/O Characteristics
This section describes the characteristics of all I/O pins. All parameters are not always applicable, e.g. not
all pins feature pull up/down resistances.
Table A-6. 5V I/O Characteristics
Conditions are 4.5< VDDX <5.5V Temperature from –40˚C to +140˚C, unless otherwise noted
Num C
Rating
Symbol
Min
Typ
Max
Unit
1 P Input High Voltage
T Input High Voltage
2 P Input Low Voltage
T Input Low Voltage
3 C Input Hysteresis
4
P
Input Leakage Current (pins in high ohmic input mode)(1)
Vin = VDD5 or VSS5
5
C
Output High Voltage (pins in output mode)
Partial Drive IOH = –2mA
VIH
0.65*VDD5
—
VIH
—
—
VIL
—
—
VIL
VSS5 - 0.3
—
VHYS
250
Iin
—
—
VOH
VDD5 – 0.8
—
—
V
VDD5 + 0.3 V
0.35*VDD5 V
—
V
—
mV
1
µA
—
V
6
P
Output High Voltage (pins in output mode)
Full Drive IOH = –10mA
VOH
VDD5 – 0.8
—
—
V
7
C
Output Low Voltage (pins in output mode)
Partial Drive IOL = +2mA
VOL
—
—
0.8
V
8
P
Output Low Voltage (pins in output mode)
Full Drive IOL = +10mA
VOL
—
—
0.8
V
9
P
Internal Pull Up Device Current,
tested at VIL Max.
IPUL
—
—
–130
µA
10
C
Internal Pull Up Device Current,
tested at VIH Min.
IPUH
–10
—
—
µA
11
P
Internal Pull Down Device Current,
tested at V Min.
IH
IPDH
—
—
130
µA
12
C
Internal Pull Down Device Current,
tested at VIL Max.
IPDL
10
—
—
µA
13 D Input Capacitance
Cin
—
7
—
pf
Injection current(2)
14 T Single Pin limit
Total Device Limit. Sum of all injected currents
IICS
–2.5
—
IICP
–25
—
2.5
mΑ
25
15 P Port P, J Interrupt Input Pulse filtered(3)
tPIGN
—
—
3
µs
16 P Port P, J Interrupt Input Pulse passed3
tPVAL
10
—
—
µs
1. Maximum leakage current occurs at maximum operating temperature. Current decreases by approximately one-half for each
8 C to 12 C in the tempearture range from 50 C to 125 C.
2. Refer to Section A.1.4, “Current Injection”, for more details
3. Parameter only applies in STOP or Pseudo STOP mode.
644
MC9S12C-Family / MC9S12GC-Family
Freescale Semiconductor
Rev 01.23