MC9S12C Datasheet, PDF (641/680 Pages) Motorola, Inc – 16-Bit Microcontroller

Appendix A Electrical Characteristics
A.1.7 Operating Conditions
This chapter describes the operating conditions of the devices. Unless otherwise noted those conditions
apply to all the following data.
NOTE
Instead of specifying ambient temperature all parameters are specified for
the more meaningful silicon junction temperature. For power dissipation
calculations refer to Section A.1.8, “Power Dissipation and Thermal
Characteristics”
.
Table A-4. Operating Conditions
Rating
Symbol
Min
Typ
Max
Unit
I/O, Regulator and Analog Supply Voltage
Digital Logic Supply Voltage ⁽¹⁾
PLL Supply Voltage ¹
V_DD5
2.97
5
5.5
V
V_DD
2.35
2.5
2.75
V
V_DDPLL
2.35
2.5
2.75
V
Voltage Difference V_DDX to V_DDA
∆_VDDX
–0.1
0
0.1
V
Voltage Difference V_SSX to V_SSR and V_SSA
Bus Frequency
Bus Frequency
∆_VSSX
–0.1
0
f_bus(2)
0.25
—
f_bus(3)
0.25
—
0.1
V
25
MHz
16
MHz
Operating Junction Temperature Range
T_J
–40
—
140
°C
1. The device contains an internal voltage regulator to generate the logic and PLL supply out of the I/O supply. The operating
conditions apply when this regulator is disabled and the device is powered from an external source.
Using an external regulator, with the internal voltage regulator disabled, an external LVR must be provided.
2. Some blocks e.g. ATD (conversion) and NVMs (program/erase) require higher bus frequencies for proper operation.
3. Some blocks e.g. ATD (conversion) and NVMs (program/erase) require higher bus frequencies for proper operation.
Freescale Semiconductor
MC9S12C-Family / MC9S12GC-Family
641
Rev 01.23