English
Language : 

MC68HC11E0CFNE2 Datasheet, PDF (151/242 Pages) Freescale Semiconductor, Inc – M68HC11 CPU, Power-saving stop and wait modes, Low-voltage devices available (3.0–5.5 Vdc)
◁
10.5 DC Electrical Characteristics
DC Electrical Characteristics
Characteristics(1)
Symbol
Min
Max
Unit
Output voltage(2)
ILoad = ±±10.0 µA
All outputs except XTAL
All outputs except XTAL, RESET, and MODA
VOL, VOH
—
0.1
V
VDD –0.1
—
Output high voltage(2)
ILoad = –0.8 mA, VDD = 4.5 V
All outputs except XTAL, RESET, and MODA
VOH
VDD –0.8
—
V
Output low voltage
ILoad = 1.6 mA
All outputs except XTAL
VOL
—
0.4
V
Input high voltage
All inputs except RESET
RESET
Input low voltage, all inputs
I/O ports, 3-state leakage
VIn = VIH or VIL
PA7, PA3, PC[7:0], PD[5:0], AS/STRA,
MODA/LIR, RESET
VIH
0.7 × VDD
0.8 × VDD
VDD + 0.3
VDD + 0.3
V
VIL
VSS –0.3
0.2 × VDD
V
IOZ
—
±10
µA
Input leakage current(3)
VIn = VDD or VSS
PA[2:0], IRQ, XIRQ
MODB/VSTBY (XIRQ on EPROM-based devices)
RAM standby voltage, power down
RAM standby current, power down
Input capacitance
PA[2:0], PE[7:0], IRQ, XIRQ, EXTAL
PA7, PA3, PC[7:0], PD[5:0], AS/STRA, MODA/LIR, RESET
IIn
—
±1
µA
—
±10
VSB
4.0
VDD
V
ISB
—
10
µA
CIn
—
8
pF
—
12
Output load capacitance
All outputs except PD[4:1]
PD[4:1]
CL
—
90
pF
—
100
1. VDD = 5.0 Vdc ± 10%, VSS = 0 Vdc, TA = TL to TH, unless otherwise noted
2. VOH specification for RESET and MODA is not applicable because they are open-drain pins. VOH specification not appli-
cable to ports C and D in wired-OR mode.
3. Refer to 10.13 Analog-to-Digital Converter Characteristics and 10.14 MC68L11E9/E20 Analog-to-Digital Converter Char-
acteristics for leakage current for port E.
M68HC11E Family Data Sheet, Rev. 5.1
Freescale Semiconductor
151
 ▷