LM3S5P3B Datasheet, PDF (51/1170 Pages) Texas Instruments – Stellaris® LM3S5P3B Microcontroller

Stellaris^® LM3S5P3B Microcontroller
1.3.3.1
1.3.3.2
■ Three UARTs with IrDA and ISO 7816 support (one UART with modem flow control and status)
■ Two I²C modules
■ Two Synchronous Serial Interface modules (SSI)
■ Integrated Interchip Sound (I²S) module
The following sections provide more detail on each of these communications functions.
Controller Area Network (see page 802)
Controller Area Network (CAN) is a multicast shared serial-bus standard for connecting electronic
control units (ECUs). CAN was specifically designed to be robust in electromagnetically noisy
environments and can utilize a differential balanced line like RS-485 or twisted-pair wire. Originally
created for automotive purposes, it is now used in many embedded control applications (for example,
industrial or medical). Bit rates up to 1 Mbps are possible at network lengths below 40 meters.
Decreased bit rates allow longer network distances (for example, 125 Kbps at 500m).
A transmitter sends a message to all CAN nodes (broadcasting). Each node decides on the basis
of the identifier received whether it should process the message. The identifier also determines the
priority that the message enjoys in competition for bus access. Each CAN message can transmit
from 0 to 8 bytes of user information.
The LM3S5P3B microcontroller includes one CAN unit with the following features:
■ CAN protocol version 2.0 part A/B
■ Bit rates up to 1 Mbps
■ 32 message objects with individual identifier masks
■ Maskable interrupt
■ Disable Automatic Retransmission mode for Time-Triggered CAN (TTCAN) applications
■ Programmable Loopback mode for self-test operation
■ Programmable FIFO mode enables storage of multiple message objects
■ Gluelessly attaches to an external CAN transceiver through the CANnTX and CANnRX signals
USB (see page 852)
Universal Serial Bus (USB) is a serial bus standard designed to allow peripherals to be connected
and disconnected using a standardized interface without rebooting the system.
The LM3S5P3B microcontroller supports the USB 2.0 full-speed configuration in Device mode.
The USB module has the following features:
■ Complies with USB-IF certification standards
■ USB 2.0 full-speed (12 Mbps) and low-speed (1.5 Mbps) operation with integrated PHY
■ 4 transfer types: Control, Interrupt, Bulk, and Isochronous
■ 32 endpoints
January 20, 2012
51
Texas Instruments-Production Data