LSM9DS0 Datasheet, PDF (67/74 Pages) STMicroelectronics – iNEMO inertial module 3D accelerometer, 3D gyroscope, 3D magnetometer

LSM9DS0
Register description
8.58 INT_GEN_2_THS (36h)
Table 113. INT_GEN_2_THS register
0
THS6
THS5
THS4
THS3
THS2
THS1
THS0
Table 114. INT_GEN_2_THS description
THS6 - THS0 Interrupt 1 threshold. Default value: 000 0000
8.59 INT_GEN_2_DURATION (37h)
Table 115. INT_GEN_2_DURATION register
0
D6
D5
D4
D3
D2
D1
D0
D6 - D0
Table 116. INT_GEN_2_DURATION description
Duration value. Default value: 000 0000
The D6 - D0 bits set the minimum duration of the Interrupt 2 event to be recognized.
Duration steps and maximum values depend on the ODR chosen.
8.60 CLICK_CFG (38h)
Table 117. CLICK_CFG register
--
--
ZD
ZS
YD
YS
XD
XS
Table 118. CLICK_CFG description
ZD
Enable interrupt double-click on Z-axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
ZS
Enable interrupt single-click on Z-axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
YD
Enable interrupt double-click on Y-axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
YS
Enable interrupt single-click on Y-axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
DocID024763 Rev 2
67/74
74