LSM9DS0 Datasheet, PDF (19/74 Pages) STMicroelectronics – iNEMO inertial module 3D accelerometer, 3D gyroscope, 3D magnetometer

LSM9DS0
Module specifications
2.5
Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 8. Absolute maximum ratings
Symbol
Ratings
Maximum value
Unit
Vdd Supply voltage
-0.3 to 4.8
V
Vdd_IO I/O pins supply voltage
-0.3 to 4.8
V
Input voltage on any control pin (SCL/SPC, SDA,
Vin
SDO_XM/SA0_XM, SDO_G/SA0_G, CS_G, CS_XM, -0.3 to Vdd_IO +0.3 V
DEN_G)
A_POW Acceleration (any axis, powered, Vdd = 2.5 V)
3,000 for 0.5 ms
g
10,000 for 0.1 ms
g
A_UNP Acceleration (any axis, unpowered)
3,000 for 0.5 ms
g
10,000 for 0.1 ms
g
T_OP
T_STG
ESD
Operating temperature range
Storage temperature range
Electrostatic discharge protection
-40 to +85
°C
-40 to +125
°C
2 (HBM)
kV
Note:
Supply voltage on any pin should never exceed 4.8 V
This device is sensitive to mechanical shock, improper handling can cause
permanent damage to the part.
This is an electrostatic-sensitive device (ESD), improper handling can cause
permanent damage to the part.
DocID024763 Rev 2
19/74
74