LSM9DS0 Datasheet, PDF (35/74 Pages) STMicroelectronics – iNEMO inertial module 3D accelerometer, 3D gyroscope, 3D magnetometer

LSM9DS0
Digital interfaces
6.2.1
SPI read
Figure 13. SPI read protocol
CS
SPC
SDI
RW
MS AD5 AD4 AD3 AD2 AD1 AD0
SDO
DO7 DO6 DO5 DO4 DO3 DO2 DO1 DO0
AM10130V1
The SPI read command is performed with 16 clock pulses. The multiple byte read command
is performed by adding blocks of 8 clock pulses to the previous one.
bit 0: READ bit. The value is 1.
bit 1: MS bit. When 0, does not increment address; when 1, increments address in multiple
reads.
bit 2-7: address AD(5:0). This is the address field of the indexed register.
bit 8-15: data DO(7:0) (read mode). This is the data that will be read from the device (MSb
first).
bit 16-... : data DO(...-8). Further data in multiple byte reads.
Figure 14. Multiple byte SPI read protocol (2-byte example)
CS
SP C
SDI
SD O
RW
M S A D5 A D4 AD 3 A D2 A D1 A D0
DO 7 DO 6 DO 5 DO 4 DO 3 DO 2 DO 1 DO 0 DO 15 DO 14 DO 13 DO 12 DO 11 DO 10 D O9 D O8
AM10131V1
DocID024763 Rev 2
35/74
74