C8051F336_08 Datasheet, PDF (61/227 Pages) Silicon Laboratories – Mixed-Signal Byte-Programmable EPROM MCU

C8051F336/7/8/9
SFR Definition 11.1. CPT0CN: Comparator0 Control
Bit
Name
Type
Reset
7
CP0EN
R/W
0
6
CP0OUT
R
0
5
CP0RIF
R/W
0
4
CP0FIF
R/W
0
3
2
CP0HYP[1:0]
R/W
0
0
1
0
CP0HYN[1:0]
R/W
0
0
SFR Address = 0x9B
Bit
Name
Function
7
CP0EN _{Comparator0 Enable Bit.}
0: Comparator0 Disabled.
1: Comparator0 Enabled.
6 CP0OUT _{Comparator0 Output State Flag.}
0: Voltage on CP0+ < CP0–.
1: Voltage on CP0+ > CP0–.
5
CP0RIF _{Comparator0 Rising-Edge Flag. Must be cleared by software.}
0: No Comparator0 Rising Edge has occurred since this flag was last cleared.
1: Comparator0 Rising Edge has occurred.
4
CP0FIF _{Comparator0 Falling-Edge Flag. Must be cleared by software.}
0: No Comparator0 Falling-Edge has occurred since this flag was last cleared.
1: Comparator0 Falling-Edge has occurred.
3:2 CP0HYP[1:0] _{Comparator0 Positive Hysteresis Control Bits.}
00: Positive Hysteresis Disabled.
01: Positive Hysteresis = 5 mV.
10: Positive Hysteresis = 10 mV.
11: Positive Hysteresis = 20 mV.
1:0 CP0HYN[1:0] _{Comparator0 Negative Hysteresis Control Bits.}
00: Negative Hysteresis Disabled.
01: Negative Hysteresis = 5 mV.
10: Negative Hysteresis = 10 mV.
11: Negative Hysteresis = 20 mV.
Rev.1.0
61