SI5341 Datasheet, PDF (48/56 Pages) Silicon Laboratories – LOW-JITTER, 10-OUTPUT, ANY-FREQUENCY, ANY-OUTPUT CLOCK GENERATOR

Si5341/40
8. Ordering Guide
Si534fg-Rxxxxx-GM
Timing product family
f = Clock generator family member (1, 0)
g = Device grade (A, B)
Product Revision*
Custom ordering part number (OPN) sequence ID**
Package, ambient temperature range (QFN, -40°C to +85°C)
*See Ordering Guide table for current product revision
** 5 digits; assigned by ClockBuilder Pro
Ordering
Part Number
(OPN)
Number of
Input/Output
Clocks
Output Clock
Frequency Range
(MHz)
Frequency
Synthesis Mode
Package
Temperature
Range
Si5341
Si5341A-B-GM^1,2
Si5341B-B-GM^1,2
Si5341C-B-GM^1,2
Si5341D-B-GM^1,2
0.0001 to 712.5 MHz
Integer and
4/10
0.0001 to 350 MHz
0.0001 to 712.5 MHz
fractional mode
64-Lead
9x9 QFN
–40 to 85 °C
Integer mode only
0.0001 to 350 MHz
Si5340
Si5340A-B-GM^1,2
Si5340B-B-GM^1,2
Si5340C-B-GM^1,2
Si5340D-B-GM^1,2
0.0001 to 712.5 MHz
Integer and
4/4
0.0001 to 350 MHz
0.0001 to 712.5 MHz
fractional mode
44-Lead
7x7 QFN
–40 to 85 °C
Integer Only
0.0001 to 350 MHz
Si5341/40-EVB
Si5341-EVB
—
—
Si5340-EVB
—
Evaluation
Board
—
Notes:
1. Add an R at the end of the OPN to denote tape and reel ordering options.
2. Custom, factory pre-programmed devices are available. Ordering part numbers are assigned by Silicon Labs and the
ClockBuilder Pro software utility.
3. Custom part number format is: e.g., Si5341A-Bxxxxx-GM, where “xxxxx” is a unique numerical sequence representing
the preprogrammed configuration.
4. See Sections 5.9 and 5.10 for important notes about specifying a preprogrammed device to use features or device
register settings not yet available in CBPro.
48
Rev. 1.0