JN516X Datasheet, PDF (93/94 Pages) NXP Semiconductors – IEEE802.15.4 Wireless Microcontroller

Disclaimers
Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give
any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation -
lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to
result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion
and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP
Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine
whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned
application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products.
NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the
products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect.
Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause
permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above
those given in the Operating Conditions section or the Electrical Characteristics sections of this document is not warranted. Constant or repeated
exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device.
AEC unqualified products — This product has not been qualified to the appropriate Automotive Electronics Council (AEC) standard Q100 or Q101
and should not be used in automotive applications, including but not limited to applications where failure or malfunction of an NXP Semiconductors
product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no
liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is for the
customer’s own risk.
Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the
Product data sheet
All products are sold subject to NXP Semiconductors’ terms and conditions of sale, supplied at the time of order acknowledgment and published at
http://www.nxp.com/profile/terms.
Trademarks
All trademarks are the property of their respective owners.
“JenNet” and “JenNet-IP” are trademarks of NXP B.V..
Version Control
Version
1.0
1.1
Notes
07-01-13 First public version, released as Production
14-01-13 Minor corrections made
© NXP Laboratories UK 2013
JN-DS-JN516x v1.1 Production
93