JN516X Datasheet, PDF (80/94 Pages) NXP Semiconductors – IEEE802.15.4 Wireless Microcontroller

A.5 Tape and Reel Information
A.5.1 Tape Orientation and Dimensions
The general orientation of the 40QFN package in the tape is as shown in Figure 47.
Figure 47: Tape and Reel Orientation
Figure 48 shows the detailed dimensions of the tape used for 6x6mm 40QFN devices.
Reference
Ao
Bo
Ko
F
P1
W
Dimensions (mm)
6.30 ±0.10
6.30 ±0.10
1.10 ±0.10
7.500 ±0.10
12.0 ±0.10
16.00 +0.30/-0.3
(I) Measured from centreline of sprocket hole to centreline of pocket
(II) Cumulative tolerance of 10 sprocket holes is ±0.20mm
(III) Measured from centreline of sprocket hole to centreline of pocket
(IV) Other material available
Figure 48: Tape Dimensions
80
JN-DS-JN516x v1.1 Production
© NXP Laboratories UK 2013