JN516X Datasheet, PDF (59/94 Pages) NXP Semiconductors – IEEE802.15.4 Wireless Microcontroller

19 Electrical Characteristics
19.1 Maximum Ratings
Exceeding these conditions may result in damage to the device.
Parameter
Device supply voltage VDD1, VDD2
Min
-0.3V
Max
3.6V
Supply voltage at voltage regulator bypass pins
VB_xxx
-0.3V
1.98V
Voltage on analogue pins XTALOUT, XTALIN,
VCOTUNE, RF_IN.
-0.3V
VB_xxx + 0.3V
Voltage on analogue pins VREF, ADC1, IBIAS
-0.3V
VDD1 + 0.3V
Voltage on any digital pin
-0.3V
VDD2 + 0.3V
Storage temperature
-40ºC
150ºC
Reflow soldering temperature according to
IPC/JEDEC J-STD-020C
ESD rating
Human Body Model ¹
Charged Device Model ²
260ºC
2.0kV
500V
1) Testing for Human Body Model discharge is performed as specified in JEDEC Standard JESD22-A114.
2) Testing for Charged Device Model discharge is performed as specified in JEDEC Standard JESD22-C101.
19.2 DC Electrical Characteristics
19.2.1 Operating Conditions
Supply
Min
Max
VDD1, VDD2
2.0V
3.6V
Standard Ambient temperature range
-40ºC
85ºC
Extended Ambient temperature range
-40ºC
125ºC
In the following sections typical is defined as 25ºC and VDD1,2 = 3V
Most parameter values cover the extended temperature range up to 125 ºC, where this is not the case, two values
are given, the value in italics type face is for standard temperature range up to 85ºC and the value in bold is for the
extended range.
© NXP Laboratories UK 2013
JN-DS-JN516x v1.1 Production
59