JN516X Datasheet, PDF (69/94 Pages) NXP Semiconductors – IEEE802.15.4 Wireless Microcontroller

19.3.13 Radio Transceiver
This JN516x meets all the requirements of the IEEE802.15.4 standard over 2.0 - 3.6V and offers the following
improved RF characteristics. All RF characteristics are measured single ended.
This part also meets the following regulatory body approvals, when used with NXP’s Module Reference Designs.
Compliant with FCC part 15, rules, IC Canada, ETSI ETS 300-328 and Japan ARIB STD-T66
 The PCB schematic and layout rules detailed in Appendix B.4
must be followed. Failure to do so will likely result in the JN516x
failing to meet the performance specification detailed herein and
worst case may result in device not functioning in the end
application.
Parameter
Type
Impedance ¹
Frequency range
ESD levels (pin 17)
Min
Typical
RF Port Characteristics
2.400 GHz
50ohm
2KV (HBM)
500v (CDM)
Max
Notes
Single Ended
2.4-2.5GHz
2.485GHz
1) With external matching inductors and assuming PCB layout as in Appendix B.4.
© NXP Laboratories UK 2013
JN-DS-JN516x v1.1 Production
69