MC68340AB16E Datasheet, PDF (289/441 Pages) Motorola, Inc – Integrated Processor with DMA User’s Manual

Freescale Semiconductor, Inc.
DMAINT1
DMACCR1
DMACSR1
DMAFCR1
DMASAR1
DMADAR1
DMABTC1
SARADD
NUMBYTE
EQU $4
EQU $8
EQU $A
EQU $B
EQU $C
EQU $10
EQU $14
EQU $10000
EQU $C
interrupt register channel 1
control register channel 1
status register channel 1
function code register channel 1
source address register channel 1
destination address register channel 1
byte transfer count register channel 1
source address
number of bytes to transfer
***************************************************************************
***************************************************************************
* Initialize DMA Channel 1
***************************************************************************
LEA MODBASE+DMACH1,A0 Pointer to channel 1
* Initialize DMA channel 1 MCR
* Normal Operation, ignore FREEZE, single-address mode. ISM field at 2. Make
* sure CPU32 SR I2-I0 bits are less than or equal to ISM bits for channel startup.
* Supervisor/user reg. unrestricted, MAID field at 7. IARB priority at 1.
MOVE.W #$1271,(A0)
* Clear channel control reg.
* Clear STR (start) bit to prevent the channel from starting a transfer early.
CLR.W
DMACCR1(A0)
* Initialize interrupt reg.
* Interrupt priority at 7, interrupt vector at $42.
MOVE.W #$0742,DMAINT1(A0)
* Initialize channel status reg.
* Clear the DONE, BES, BED, CONF and BRKP bits to allow channel to startup.
MOVE.B #$7C,DMACSR1(A0)
* Initialize function code reg.
* DMA space, user data space for source.
MOVE.B #$99,DMAFCR1(A0)
* Initialize source operand address
* Source address is equal to $10000.
MOVE.L SARADD,DMASAR1(A0)
* Initialize the byte transfer count reg.
* The number of bytes to be transferred is $C or 3 long words
MOVE.L NUMBYTE,DMABTC1(A0)
* Channel control reg. init. and Start DMA transfers
MOTOROLA
MC68340 USER’S MANUAL
6-39
For More Information On This Product,
Go to: www.freescale.com