DS1035 Datasheet, PDF (43/106 Pages) Dallas Semiconductor – 3-in-1 High.Speed Silicon Delay Line

DC and Switching Characteristics
MachXO2 Family Data Sheet
Static Supply Current – ZE Devices^{1, 2, 3, 6}
Symbol
Parameter
Device
Typ.⁴
Units
LCMXO2-256ZE
18
µA
LCMXO2-640ZE
28
µA
LCMXO2-1200ZE
56
µA
I_CC
Core Power Supply
LCMXO2-2000ZE
80
µA
LCMXO2-4000ZE
124
µA
LCMXO2-7000ZE
189
µA
I_CCIO
Bank Power Supply⁵
V_CCIO = 2.5V
All devices
0
mA
1. For further information on supply current, please refer to TN1198, Power Estimation and Management for MachXO2 Devices.
2. Assumes blank pattern with the following characteristics: all outputs are tri-stated, all inputs are configured as LVCMOS and held at V_CCIO
or GND, on-chip oscillator is off, on-chip PLL is off. To estimate the impact of turning each of these items on, please refer to the following
table or for more detail with your specific design use the Power Calculator tool.
3. Frequency = 0 MHz.
4. T_J = 25°C, power supplies at nominal voltage.
5. Does not include pull-up/pull-down.
6. To determine the MachXO2 peak start-up current data, use the Power Calculator tool.
Static Power Consumption Contribution of Different Components – 
ZE Devices
The table below can be used for approximating static power consumption. For a more accurate power analysis for
your design please use the Power Calculator tool.
Symbol
I_DCBG
I_DCPOR
I_{DCIOBANKCONTROLLER}
Parameter
Bandgap DC power contribution
POR DC power contribution
DC power contribution per I/O bank controller
Typ.
Units
101
µA
38
µA
143
µA
3-4