SAM4L_14 Datasheet, PDF (147/176 Pages) ATMEL Corporation – Technology for Ultra-low Power Consumption

ATSAM4L8/L4/L2
The maximum SPI master output frequency is given by the following formula:
f_SPCKMAX = MIN(f_PINMAX,_S----_P-¹---_I--_n--)
Where SPIn is the MOSI delay, SPI2 or SPI5 depending on CPOL and NCPHA. f_PINMAX is the
maximum frequency of the SPI pins. refer to the I/O Pin Characteristics section for the maximum
frequency of the pins.
9.10.3.2
Maximum SPI Frequency, Master Input
The maximum SPI master input frequency is given by the following formula:
f_SPCKMAX
=
-----------------¹------------------
SPIn + t_VALID
Where SPIn is the MISO setup and hold time, SPI0 + SPI1 or SPI3 + SPI4 depending on
CPOL and NCPHA. t_VALID is the SPI slave response time. refer to the SPI slave datasheet for
t_VALID .
Slave mode
Figure 9-14. SPI Slave Mode with (CPOL= 0 and NCPHA= 1) or (CPOL= 1 and NCPHA= 0)
SPCK
MISO
SPI6
MOSI
SPI7
SPI8
Figure 9-15. SPI Slave Mode with (CPOL= NCPHA= 0) or (CPOL= NCPHA= 1)
SPCK
MISO
SPI9
MOSI
SPI10
SPI11
42023GS–SAM–03/2014
147