English
Language : 

SAM4L_14 Datasheet, PDF (115/176 Pages) ATMEL Corporation – Technology for Ultra-low Power Consumption
◁
ATSAM4L8/L4/L2
3.
These values are based on characterization. These values are not covered by test limits in production
9.6.2 High-drive I/O Pin : PA02, PC04, PC05, PC06
Table 9-14. High-drive I/O Pin Characteristics (1)
Symbol
RPULLUP
RPULLDOWN
VIL
VIH
VOL
VOH
IOL
IOH
tRISE
Parameter
Pull-up resistance (2)
Pull-down resistance(2)
Input low-level voltage
Input high-level voltage
Output low-level voltage
Output high-level voltage
Output low-level current (3)
Output high-level current(3)
Rise time(2)
Conditions
ODCR0=0
ODCR0=1
ODCR0=0
ODCR0=1
OSRR0=0
OSRR0=1
OSRR0=0
OSRR0=1
1.68V<VVDD<2.7V
2.7V<VVDD<3.6V
1.68V<VVDD<2.7V
2.7V<VVDD<3.6V
1.68V<VVDD<2.7V
2.7V<VVDD<3.6V
1.68V<VVDD<2.7V
2.7V<VVDD<3.6V
ODCR0=0
1.68V<VVDD<2.7 V,
Cload = 25pF
ODCR0=0
2.7V<VVDD<3.6 V,
Cload = 25pF
Min
Typ
40
40
-0.3
0.8 * VVDD
VVDD - 0.4
Max
0.2 * VVDD
VVDD + 0.3
0.4
Units
kΩ
kΩ
V
1.8
mA
3.2
3.2
mA
6
1.6
mA
3.2
3.2
mA
6
20
ns
40
11
ns
18
tFALL
Fall time(2)
OSRR0=0
OSRR0=1
OSRR0=0
OSRR0=1
ODCR0=0
1.68V<VVDD<2.7 V,
Cload = 25pF
ODCR0=0
2.7V<VVDD<3.6 V,
Cload = 25pF
20
ns
40
11
ns
18
FPINMAX
Output frequency(2)
OSRR0=0
OSRR0=1
OSRR0=0
OSRR0=1
ODCR0=0, VVDD>2.7V
load = 25pF
ODCR0=1, VVDD>2.7V
load = 25pF
22
MHz
17
MHz
35
MHz
26
MHz
ILEAK
CIN
Input leakage current(3)
Input capacitance(2)
Pull-up resistors disabled
0.01
2
µA
10
pF
1.
VVDD corresponds to either VVDDIN or VVDDIO, depending on the supply for the pin. Refer to Section 3-5 on page 13 for details
2.
These values are based on simulation. These values are not covered by test limits in production or characterization
3.
These values are based on characterization. These values are not covered by test limits in production
42023GS–SAM–03/2014
115
 ▷