DS791 Datasheet, PDF (1/46 Pages) Xilinx, Inc – LogiCORE IP AXI Controller

DS791 June 22, 2011
LogiCORE IP AXI Controller
Area Network (axi_can) (v1.03.a)
Product Specification
Introduction
The Xilinx® LogiCORE™ IP Controller Area Network
(CAN) product specification defines the architecture
and features of the Xilinx CAN controller core. This
document also defines the addressing and functionality
of the various registers in the design, in addition to
describing the user interface. The scope of this
document does not extend to describing the CAN
protocol and assumes knowledge of the specifications
described in the Reference Documents section.
Features
• Conforms to the ISO 11898 -1, CAN 2.0A, and CAN
2.0B standards
• Supports Industrial (I) and Extended Temperature
Range (Q) grade device support
• Supports both standard (11-bit identifier) and
extended (29-bit identifier) frames
• Supports bit rates up to 1 Mb/s
• Transmit message FIFO with a user-configurable
depth of up to 64 messages
• Transmit prioritization through one High-Priority
Transmit buffer
• Automatic re-transmission on errors or arbitration
loss
• Receive message FIFO with a user- configurable
depth of up to 64 messages
• Acceptance filtering (through a user-configurable
number) of up to four acceptance filters
• Sleep Mode with automatic walk-up
• Loop Back Mode for diagnostic applications
• Maskable Error and Status Interrupts
• Readable Error Counters
LogiCORE IP Facts Table
Core Specifics
Supported
Device Family⁽¹⁾
Virtex-7
Kintex™-7
Artix™-7
Zynq™-7000
Virtex-6
Spartan-6/XA
Supported User
Interfaces
AXI4-Lite
Resources
See Table 40 and Table 41.
Provided with Core
Documentation
Product Specification
Design Files
VHDL
Example Design
Not Provided
Test Bench
Not Provided
Constraints File
None
Simulation
Model
None
Tested Design Tools
Design Entry
Tools
XPS 13.2
Simulation
Mentor Graphics ModelSim ⁽²⁾
Synthesis Tools
XST 13.2
Support
Provided by Xilinx, Inc.
1. For a complete listing of supported devices, see
IDS Embedded Edition Derivative Device Support for this core.
2. For the supported versions of the tools, see the ISE Design
Suite 13: Release Notes Guide.
© Copyright 2010-2011. Xilinx, Inc. Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Zynq, and other designated brands included herein are
trademarks of Xilinx in the United States and other countries. ARM is a registered trademark of ARM in the EU and other countries. The AMBA trademark is a
registered trademark of ARM Limited. All other trademarks are the property of their respective owners.
DS791 June 22, 2011
www.xilinx.com
1
Product Specification