TLK105_16 Datasheet, PDF (8/104 Pages) Texas Instruments – TLK105 TLK106 Industrial Temp, Single Port 10/100Mbs Ethernet Physical Layer

TLK105
TLK106
SLLSEB8C – AUGUST 2012 – REVISED APRIL 2016
www.ti.com
PIN
NAME
LED_CFG (CRS)
AMDIX_EN (RX_ER)
MII_MODE (RX_DV)
Table 3-1. Strap Options (continued)
TYPE
NO.
DESCRIPTION
LED Configuration: This option selects the operation mode of the LED LINK pin. Default
27 S, O, PU is Mode 1. All modes are also configurable via register access. See PHY Control Register
(PHYCR), Address 0x0019.
28
S, O, PU
Auto-MDIX Enable: This option sets the Auto-MDIX mode. By default, it enables Auto-
MDIX. An external pull-down resistor disables Auto-MDIX mode.
MII Mode Select: This option selects the operating mode of the MAC data interface. This
26 S, O, PD pin has a weak internal pull-down, and it defaults to normal MII operation mode. An
external pull-up causes the device to operate in RMII mode.
3.2 Power Supply Configuration
The TLK10x provides best-in-class flexibility of power supplies.
3.2.1 Single Supply Operation
If a single 3.3V power supply is desired, the TLK10x internal regulator provides the necessary core supply
voltages. Ceramic capacitors of 10µf and 0.1µf should be placed close to the PFBOUT (pin 15) which is
the output of the internal regulator. The PFBOUT pin should be connected to the PFBIN1 and PFBIN2 on
the board. A small capacitor of 0.1µF should be placed close to the PFBIN1 (pin 13) and PFBIN2 (pin 24).
To operate in this mode, connect the TLK10x supply pins as shown in Figure 3-1.
3.3V
Supply
Pin 14
10mF 10nF 1nF 100pF ^(AVDD33)
0.1μF
0.1μF
Pin 13
(PFBIN1)
10μF
0.1μF
Pin 15
(PFBOUT)
Pin 24
(PFBIN2)
Pin 9
(RD–)
Pin 10
(RD+)
49.9W
49.9W
3.3V
Supply
3.3V
Supply
1mF
0.1mF
1mF
1:1
RD –
RD +
Pin 11
(TD–)
Pin 12
(TD+)
49.9W
3.3V
Supply
1mF
0.1mF*
49.9W
TD –
TD +
1mF
0.1mF* ^{1:1 T1}
RJ45
3.3V
Supply
Pin 21
(VDD_IO)
100pF 1nF 10nF 10mF
Copyright © 2016, Texas Instruments Incorporated
Figure 3-1. Power Connections for Single Supply Operation
8
Hardware Configuration
Copyright © 2012–2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TLK105 TLK106