LM3S5762 Datasheet, PDF (770/841 Pages) Texas Instruments – Stellaris® LM3S5762 Microcontroller

Signal Tables
Table 19-3. Signals by Function, Except for GPIO (continued)
Function
Pin Name Pin Number Pin Type Buffer Type^a
Description
HIB
33
O
OD
An output that indicates the processor is in
Hibernate mode.
VBAT
37
-
Power Power source for the Hibernation module. It is
normally connected to the positive terminal of a
battery and serves as the battery
backup/Hibernation module power-source supply.
Hibernate
WAKE
32
I
TTL
An external input that brings the processor out of
Hibernate mode when asserted.
XOSC0
34
I
Analog Hibernation module oscillator crystal input or an
external clock reference input. Note that this is
either a crystal or a 32.768-kHz oscillator for the
Hibernation module RTC.
XOSC1
35
O
Analog Hibernation module oscillator crystal output. Leave
unconnected when using a single-ended clock
source.
SWCLK
52
I
TTL
JTAG/SWD CLK.
SWDIO
51
I/O
TTL
JTAG TMS and SWDIO.
SWO
49
O
TTL
JTAG TDO and SWO.
JTAG/SWD/SWO
TCK
52
I
TTL
JTAG/SWD CLK.
TDI
50
I
TTL
JTAG TDI.
TDO
49
O
TTL
JTAG TDO and SWO.
TMS
51
I/O
TTL
JTAG TMS and SWDIO.
Fault0
27
I
TTL
PWM Fault 0.
PWM0
61
O
TTL
PWM 0. This signal is controlled by PWM Generator
0.
PWM1
62
O
TTL
PWM 1. This signal is controlled by PWM Generator
0.
PWM
PWM2
63
O
TTL
PWM 2. This signal is controlled by PWM Generator
1.
PWM3
64
O
TTL
PWM 3. This signal is controlled by PWM Generator
1.
PWM4
25
O
TTL
PWM 4. This signal is controlled by PWM Generator
2.
PWM5
26
O
TTL
PWM 5. This signal is controlled by PWM Generator
2.
770
November 17, 2011
Texas Instruments-Production Data