LM3S5762 Datasheet, PDF (208/841 Pages) Texas Instruments – Stellaris® LM3S5762 Microcontroller

System Control
Bit/Field
9:8
7
6
5
4
3
2
1
0
Name
MAXADCSPD
MPU
HIB
TEMPSNS
PLL
WDT
SWO
SWD
JTAG
Type
RO
RO
RO
RO
RO
RO
RO
RO
RO
Reset
0x2
Description
Max ADC Speed. This field indicates the maximum rate at which the
ADC samples data.
Value Description
0x2 500K samples/second
1
MPU Present. When set, indicates that the Cortex-M3 Memory Protection
Unit (MPU) module is present. See the "Cortex-M3 Peripherals" chapter
in the Stellaris Data Sheet for details on the MPU.
1
Hibernation Module Present. When set, indicates that the Hibernation
module is present.
1
Temp Sensor Present. When set, indicates that the on-chip temperature
sensor is present.
1
PLL Present. When set, indicates that the on-chip Phase Locked Loop
(PLL) is present.
1
Watchdog Timer Present. When set, indicates that a watchdog timer is
present.
1
SWO Trace Port Present. When set, indicates that the Serial Wire Output
(SWO) trace port is present.
1
SWD Present. When set, indicates that the Serial Wire Debugger (SWD)
is present.
1
JTAG Present. When set, indicates that the JTAG debugger interface
is present.
208
November 17, 2011
Texas Instruments-Production Data