|
LM3S5762 Datasheet, PDF (30/841 Pages) Texas Instruments – Stellaris® LM3S5762 Microcontroller | |||
|
◁ |
Revision History
Table 1. Revision History (continued)
Date
April 2009
Revision Description
5368 â Added JTAG/SWD clarification (see âCommunication with JTAG/SWDâ on page 164).
â Added clarification that the PLL operates at 400 MHz, but is divided by two prior to the application
of the output divisor.
â Corrected bits 2:1 in I2CSIMR, I2CSRIS, I2CSMIS, and I2CSICR registers to be reserved bits
(cannot interrupt on start and stop conditions).
â Corrected bits 15:11 in USBTXMAXP0/1/2 and USBRXMAXP0/1/2 registers to be reserved bits
(cannot define multiplier).
â Additional minor data sheet clarifications and corrections.
January 2009
4724
â Corrected bit type for RELOAD bit field in SysTick Reload Value register; changed to R/W.
â Added clarification as to what happens when the SSI in slave mode is required to transmit but there
is no data in the TX FIFO.
â Added section called "Setting the Device Address" for special considerations when writing the
USBFADDR register.
â Corrected USBEPIDX to be an 8-bit register.
â Added comparator operating mode tables.
â Corrected pin types of signals RST to "in" and USB0RBIAS to "out".
â Additional minor data sheet clarifications and corrections.
November 2008
4283
â Revised High-Level Block Diagram.
â Additional minor data sheet clarifications and corrections were made.
30
November 17, 2011
Texas Instruments-Production Data
|
▷ |