|
TLK3114SA_13 Datasheet, PDF (54/66 Pages) Texas Instruments – 10-Gbps XAUI Transceiver | |||
|
◁ |
Table 3â37. PHY XS Register Cross Reference (Registers 4.32768â4.32776)
REGISTER
ADDRESS
NAME
EQUIVALENT
REGISTER
ADDRESS
EQUIVALENT REGISTER
NAME
DEFINITION
4.32768
PHY XS global configuration
4.32769â4.32772 PHY XS channels AâD configuration
16
17â20
Global Configuration
Channels AâD Configuration
See Table 3â18
See Table 3â19, Table 3â20,
Table 3â21, and Table 3â22
4.32774
4.32775
4.32776
4.32777
PHY XS channel status
PHY XS channel sync status
PHY XS CTC status
Error counter control
4.32778â4.32781 Channels AâD error count
22
23
24
25
26â29
Channel Status
Channel Sync Status
CTC Status
Error Counter Control
Channels AâD Error Count
See Table 3â23
See Table 3â24
See Table 3â25
See Table 3â26
See Table 3â27, Table 3â28,
Table 3â29, and Table 3â30
Table 3â38. DTE XS Control 1 Register (Register 5.0)
BIT(S)
NAME
15
Reset
14
Loopback
DESCRIPTION
Logically ORed with the inverse of RSTN terminal.
1 = Global resets including FIFO clear.
0 = Normal operation (default).
1 = Enable loopback mode on all channels.
0 = Disable loopback mode on all channels (default).
READ/WRITE
Read/Write
Self Clearingâ
Read/Write
13
Speed selection (LSB)
Not applicable. Read returns 1.
12:7 Reserved
Not applicable. Read returns all 0s.
6
Speed selection (MSB)
Not applicable. Read returns 1.
5:2
Speed selection
Not applicable. Read returns all 0s.
1:0
Reserved
Not applicable. Read returns all 0s.
â After reset, this bit is set to 1; it automatically sets itself back to 0 on the next MDC clock cycle.
Table 3â39. DTE XS Status 1 Register (Register 5.1)
Read-only
Read-only
Read-only
Read-only
Read-only
BIT(S)
15:8
7
6:3
NAME
Reserved
Local fault
Reserved
2
RX link status
1:0
Reserved
DESCRIPTION
Read is ignored.
Logical OR of register 5.8, bits 10 and 11.
Read is ignored.
1 = Link is up
0 = Link is down
Latches low until read.
Read is ignored.
READ/WRITE
Read-only
Read-only
Read-only
Read-only
Read-only
Table 3â40. DTE XS Speed Ability Register (Register 5.4)
BIT(S)
15:1
0
NAME
Reserved
10G capable
Read returns all 0s.
Read returns a 1.
DESCRIPTION
READ/WRITE
Read-only
Read-only
Table 3â41. Devices in Package Register (Register 5.5)
BIT(S)
15:6
5
NAME
Reserved
DTE XS present
DESCRIPTION
Read is ignored.
1 = Device is configured as a DTE XS.
0 = Device is configured as a PHY XS.
READ/WRITE
Read-only
Read-only
4
PHY XS present
1 = Device is configured as a PHY XS.
0 = Device is configured as a DTE XS.
Read-only
3:1
Not applicable
Read returns all 0s.
0
Clause 22 registers present Read returns 1.
Read-only
Read-only
3â35
|
▷ |