|
TLK3114SA_13 Datasheet, PDF (42/66 Pages) Texas Instruments – 10-Gbps XAUI Transceiver | |||
|
◁ |
Table 3â12. MDIO Registers (Continued)
REGISTER ADDRESS
5.32773
5.32774
5.32775
5.32776
5.32777
5.32778â5.32781
5.32782â5.65535
REGISTER NAME
Reserved
DTE XS channel status
DTE XS channel sync status
DTE XS CTC status
Error counter control
Channel AâD error count
Not applicable
Reserved
See Table 3â44
See Table 3â44
See Table 3â44
See Table 3â44
See Table 3â44
â
DEFINITION
Several MDIO register bits may be affected by Boolean functions. When a bit value is overridden through a Boolean
function, writes to that bit are ignored. The bit returns to its prior value once the override is removed.
Table 3â13. Control Register Bit Definitions (Register 0)
BIT(S)
NAME
DESCRIPTION
15
Reset
Logically ORed with the inverse of the RSTN terminal.
1 = Global resets including FIFO clear
0 = Normal operation
14
Loopback
1 = Enable loopback mode on all channels.
0 = Disable loopback mode on all channels (default).
13
Speed selection (LSB)
Not applicable. Read returns a 1.
12
Auto-negotiation enable
Not applicable. Read returns a 0.
11
Power down
Logically ORed with the inversion of the ENABLE terminal.
1 = Power-down mode is enabled.
0 = Normal operation (default).
10
Isolate
Not applicable. Read returns a 0.
9
Restart auto-negotiation
Not applicable. Read returns a 0.
8
Duplex mode
Only full duplex is supported. Writes are ignored. Read returns a 1.
7
Collision test
Not applicable. Read returns a 0.
6
Speed selection (MSB)
Not applicable. Read returns a 1.
5:0
Reserved
Write as 0. Ignore on read.
â After reset, this bit is set to 1; it automatically sets itself back to 0 on the next MDC clock cycle.
READ/WRITE
Read/Write
Self Clearingâ
Read/Write
Read-only
Read-only
Read/Write
Read-only
Read-only
Read-only
Read-only
Read-only
â
BIT(S)
15:9
8
7
6:3
2
1
0
Table 3â14. Status Register Bit Definitions (Register 1)
NAME
DESCRIPTION
Read returns all 0s.
Extended status
Read returns a 1, indicating extended status information is held in register 15.
Reserved
Read is ignored.
Various configurations Read returns all 0s.
Link status
1 = Link is up
0 = Link is down
Latches low until read.
Jabber detect
Read returns a 0.
Extended capability
Read returns a 1, indicating extended register capability.
READ/WRITE
Read-only
Read-only
Read-only
Read-only
Read-only
Read-only
Read-only
Registers 2 and 3 contain the identifier for the 10-Gbps ethernet XGXS device.
The identifier code is composed of bits 3â24 of the 25-bit organizationally unique identifier (OUI) assigned to Texas
Instruments by the IEEE. The 6-bit manufacturer model number is unique to the TLK3114SA device. The
manufacturer revision number denotes the current revision of the TLK3114SA device.
3â23
|
▷ |