DS90UH927Q-Q1 Datasheet, PDF (43/68 Pages) Texas Instruments – 5-MHz to 85-MHz 24-Bit Color FPD-Link III Serializer with HDCP

www.ti.com
DS90UH927Q-Q1
SNLS433C – NOVEMBER 2012 – REVISED JANUARY 2015
Register Maps (continued)
ADD
(dec)
103
112
113
114
115
116
117
Table 5. Serial Control Bus Registers (continued)
ADD
(hex)
Register Name
Bit
Register
Type
Default
(hex)
Function
Description
0x67 PGID
7:0
RW
0x00 PG Indirect When writing to indirect registers, this register
Data
contains the data to be written. When reading from
indirect registers, this register contains the read back
value.
See TI App Note AN-2198 Exploring the Internal Test
Pattern Generation Feature of 720p (SNLA132)
0x70 Slave ID[1]
7:1
RW
0x00 Slave ID 1 7-bit Remote Slave Device ID 1
Configures the physical I²C address of the remote I²C
Slave device attached to the remote Deserializer. If an
I²C transaction is addressed to the Slave Alias ID1,
the transaction will be remapped to this address
before passing the transaction across the Bidirectional
Control Channel to the Deserializer.
0
Reserved
0x71 Slave ID[2]
7:1
RW
0x00 Slave ID 2 7-bit Remote Slave Device ID 2
Configures the physical I²C address of the remote I²C
Slave device attached to the remote Deserializer. If an
I²C transaction is addressed to the Slave Alias ID2,
the transaction will be remapped to this address
before passing the transaction across the Bidirectional
Control Channel to the Deserializer.
0
Reserved
0x72 Slave ID[3]
7:1
RW
0x00 Slave ID 3 7-bit Remote Slave Device ID 3
Configures the physical I²C address of the remote I²C
Slave device attached to the remote Deserializer. If an
I²C transaction is addressed to the Slave Alias ID3,
the transaction will be remapped to this address
before passing the transaction across the Bidirectional
Control Channel to the Deserializer.
0
Reserved
0x73 Slave ID[4]
7:1
RW
0x00 Slave ID 4 7-bit Remote Slave Device ID 4
Configures the physical I²C address of the remote I²C
Slave device attached to the remote Deserializer. If an
I²C transaction is addressed to the Slave Alias ID4,
the transaction will be remapped to this address
before passing the transaction across the Bidirectional
Control Channel to the Deserializer.
0
Reserved
0x74 Slave ID[5]
7:1
RW
0x00 Slave ID 5 7-bit Remote Slave Device ID 5
Configures the physical I²C address of the remote I²C
Slave device attached to the remote Deserializer. If an
I²C transaction is addressed to the Slave Alias ID5,
the transaction will be remapped to this address
before passing the transaction across the Bidirectional
Control Channel to the Deserializer.
0
Reserved
0x75 Slave ID[6]
7:1
RW
0x00 Slave ID 6 7-bit Remote Slave Device ID 6
Configures the physical I²C address of the remote I²C
Slave device attached to the remote Deserializer. If an
I²C transaction is addressed to the Slave Alias ID6,
the transaction will be remapped to this address
before passing the transaction across the Bidirectional
Control Channel to the Deserializer.
0
Reserved
Copyright © 2012–2015, Texas Instruments Incorporated
Product Folder Links: DS90UH927Q-Q1
Submit Documentation Feedback
43