CC2510_15 Datasheet, PDF (72/245 Pages) Texas Instruments – Low-Power SoC (System-on-Chip) with MCU, Memory,2.4 GHz RF Transceiver, and USB Controller

CC2511F8 - Not Recommended for New Designs
CC2510Fx / CC2511Fx
Bit Field Name
7 CHIP_ERASE_DONE
6 PCON_IDLE
5 CPU_HALTED
4 POWER_MODE_0
3 HALT_STATUS
2 DEBUG_LOCKED
1 OSCILLATOR_STABLE
0 STACK_OVERFLOW
Description
Flash chip erase done
0 Chip erase in progress
1 Chip erase done
PCON idle
0 CPU is running
1 CPU is idle (clock gated)
CPU halted
0 CPU running
1 CPU halted
Power Mode 0
0 Power Mode 1 - 3 selected
1 Power Mode 0 selected (active mode if the CPU is running)
Halt status. Returns cause of last CPU halt
0 CPU was halted by HALT debug command
1 CPU was halted by software or hardware breakpoint
Debug locked. Returns value of DBGLOCK bit
0 Debug interface is not locked
1 Debug interface is locked
Oscillators stable. This bit represents the status of the SLEEP.XSOC_STB
and SLEEP.HFRC_STB register bits.
0 Oscillators not stable
1 Oscillators stable
Stack overflow. This bit indicates when the CPU writes to DATA memory
space at address 0xFF, which is possibly a stack overflow
0 No stack overflow
1 Stack overflow
Table 47: Debug Status
SWRS055G
Page 72 of 236