CC2510_15 Datasheet, PDF (215/245 Pages) Texas Instruments – Low-Power SoC (System-on-Chip) with MCU, Memory,2.4 GHz RF Transceiver, and USB Controller

CC2511F8 - Not Recommended for New Designs
CC2510Fx / CC2511Fx
0xDF13: MCSM1 - Main Radio Control State Machine Configuration
Bit Field Name
Reset R/W Description
7:6
-
5:4 CCA_MODE[1:0]
11
3:2 RXOFF_MODE[1:0] 00
1:0 TXOFF_MODE[1:0]
00
R0 Not used
R/W Selects CCA_MODE; Reflected in CCA signal
00 Always
01 If RSSI below threshold
10 Unless currently receiving a packet
11 If RSSI below threshold unless currently receiving a packet
R/W Select what should happen (next state) when a packet has been received
00 IDLE
01 FSTXON
10 TX
11 Stay in RX
It is not possible to set RXOFF_MODE to be TX or FSTXON and at the same
time use CCA.
R/W Select what should happen (next state) when a packet has been sent (TX)
00 IDLE
01 FSTXON
10 Stay in TX (start sending preamble)
11 RX
0xDF14: MCSM0 - Main Radio Control State Machine Configuration
Bit Field Name
Reset R/W Description
7:6
-
5:4 FS_AUTOCAL[1:0] 00
R0 Not used
R/W Select calibration mode (when to calibrate)
00 Never (manually calibrate using SCAL strobe)
01 When going from IDLE to RX or TX (or FSTXON)
10 When going from RX or TX back to IDLE automatically
11 Every 4^th time when going from RX or TX to IDLE automatically
3:0
0100 R/W Reserved. Always set to 0100
SWRS055G
Page 215 of 236