CC2510_15 Datasheet, PDF (64/245 Pages) Texas Instruments – Low-Power SoC (System-on-Chip) with MCU, Memory,2.4 GHz RF Transceiver, and USB Controller

CC2511F8 - Not Recommended for New Designs
CC2510Fx / CC2511Fx
IRCON (0xC0) - CPU Interrupt Flag 4
Bit Field Name Reset R/ Description
W
7 _STIF
0
R/ Sleep Timer interrupt flag
W
0 Interrupt not pending
1 Interrupt pending
6
0
R/ Reserved. Must always be set to 0. Failure to do so will lead to ISR toggling
W (interrupt routine sustained)
5 _P0IF
0
R/ Port 0 interrupt flag
W
0 Interrupt not pending
1 Interrupt pending
4 _T4IF
0
R/ Timer 4 interrupt flag. Set to 1 when Timer 4 interrupt occurs and cleared when CPU
W vectors to the interrupt service routine.
H0
0 Interrupt not pending
1 Interrupt pending
3 _T3IF
0
R/ Timer 3 interrupt flag. Set to 1 when Timer 3 interrupt occurs and cleared when CPU
W vectors to the interrupt service routine.
H0
0 Interrupt not pending
1 Interrupt pending
2 _T2IF
0
R/ Timer 2 interrupt flag. Set to 1 when Timer 2 interrupt occurs and cleared when CPU
W vectors to the interrupt service routine.
H0
0 Interrupt not pending
1 Interrupt pending
1 _T1IF
0
R/ Timer 1 interrupt flag. Set to 1 when Timer 1 interrupt occurs and cleared when CPU
W vectors to the interrupt service routine.
H0
0 Interrupt not pending
1 Interrupt pending
0 _DMAIF
0
R/ DMA complete interrupt flag.
W
0 Interrupt not pending
1 Interrupt pending
SWRS055G
Page 64 of 236