CC2510_15 Datasheet, PDF (122/245 Pages) Texas Instruments – Low-Power SoC (System-on-Chip) with MCU, Memory,2.4 GHz RF Transceiver, and USB Controller

CC2511F8 - Not Recommended for New Designs
CC2510Fx / CC2511Fx
T2CTL (0x9E) - Timer 2 Control
Bit Field Name Reset R/W Description
7
0
R/W Reserved
0
6
TEX
0
R/W This bit is set to 1 when the timer count reaches 0x00. Writing a 1 to this bit has no
0
effect
5
0
R/W Reserved. Always set to 0.
4
INT
0
R/W Timer 2 Interrupt enable
0 Interrupt disable
1 Interrupt enable
3
0
R/W Reserved. Always set to 0
2
TIG
0
R/W Tick generator mode
0 Tick generator is running when T2CT not equal to 0x00. The tick generator
will always start running form its null state.
1 Tick generator is in free-running mode. If it is not already running it will start
from its null state when this bit is set to 1
1:0 TIP[1:0]
00
R/W This value is used to calculate the timer 2 interval / time slot, T
T = T2PR ∙ Val(T2CTL.TIP)/ timer tick speed,
00 64
01 128
10 256
11 1024
T2CT (0x9C) - Timer 2 Count
Bit Field Name Reset R/W Description
7:0 CNT[7:0]
0x00 R/W Timer count. Contents of 8-bit counter.
T2PR (0x9D) - Timer 2 Prescaler
Bit Field Name Reset R/W Description
7:0 PR[7:0]
0x00 R/W Timer prescaler multiplier. 0x00 is interpreted as 256
SWRS055G
Page 122 of 236