CC2510_15 Datasheet, PDF (130/245 Pages) Texas Instruments – Low-Power SoC (System-on-Chip) with MCU, Memory,2.4 GHz RF Transceiver, and USB Controller

CC2511F8 - Not Recommended for New Designs
CC2510Fx / CC2511Fx
T3CTL (0xCB) - Timer 3 Control
Bit Field Name Reset R/W Description
7:5 DIV[2:0]
000
R/W Prescaler divider value. Generates the active clock edge used to update the
counter as follows:
000 Tick frequency /1
001 Tick frequency /2
010 Tick frequency /4
011 Tick frequency /8
100 Tick frequency /16
101 Tick frequency /32
110 Tick frequency /64
111 Tick frequency /128
Note: Changes to these bits has immediate effect on the frequency of the active
clock edges.
4
START
0
R/W Start timer
0
Suspended
1
Normal operation
3
OVFIM
1
R/W0 Overflow interrupt mask
0
Interrupt disabled
1
Interrupt enabled
2
CLR
0
R0/W1 Clear counter. Writing a 1 resets the counter to 0x00.
This bit will be 0 when returning from PM2 and PM3
1:0 MODE[1:0] 00
R/W Timer 3 mode select. The timer operating mode is selected as follows:
00 Free running, repeatedly count from 0x00 to 0xFF
01 Down, count from T3CC0 to 0x00
10 Modulo, repeatedly count from 0x00 to T3CC0
11 Up/down, repeatedly count from 0x00 to T3CC0 and from T3CC0 down
to 0x00
SWRS055G
Page 130 of 236