LSM6DSM Datasheet, PDF (47/113 Pages) STMicroelectronics – always-on 3D accelerometer and 3D gyroscope

LSM6DSM
Application hints
Figure 20. LSM6DSM electrical connections in Mode 3 (auxiliary 4-wire SPI)
0RGH
+267
6'2
6',B$X[
63&B$X[
,17




723
9,(:




6'2B$X[
2&6B$X[
,17
9GG
9''
&
Q)
*1'
&
Q)
*1'
9GGB,2
127(
7RDYRLGOHDNDJHFXUUHQWLWLVUHFRPPHQGHGWRDGGSXOOXS
UHVLVWRUVRQWKH63,OLQHVXQOHVVWKH63,PDVWHUFDQEHOHIW
RQDOVRZKLOHWKH2,6V\VWHPLVRII
,^&63,Z
/60'60
$X[63,Z
&DPHUD
PRGXOH
,^&FRQILJXUDWLRQ
9GGB,2
5_SX
5_SX
6&/
6'$
3XOOXSWREHDGGHG
5_SX N2KP
The device core is supplied through the Vdd line. Power supply decoupling capacitors (C1,
C2 = 100 nF ceramic) should be placed as near as possible to the supply pin of the device
(common design practice).
The functionality of the device and the measured acceleration/angular rate data is
selectable and accessible through the SPI/I²C interface.
The functions, the threshold and the timing of the two interrupt pins for each sensor can be
completely programmed by the user through the SPI/I²C interface.
DocID028165 Rev 2
47/113
113